BPC PowerMaster Manuale del Proprietario Scaricare il pdf (Pagina 2)

Congratulations!

ongratulations on your purchase of the Lionel LEGACY PowerMaster controller! This device is a

high output control unit for use with any Lionel LEGACY or TMCC control system and an external

power supply, providing your railroad with up to 180 watts and ten amps of alternating current. The

LEGACY PowerMaster allows you to vary track voltage, change directions and operate whistle and bell

sounds on your non-command locomotives using your TMCC or LEGACY Remote Controllers

Read this manual thoroughly before using your controller. It has important information on the

setup and operation of this product. If you have any questions after reviewing these instructions,

contact Lionel Customer Service at 586-949-4100.

A TMCC Command Base (6-12911), LEGACY Command Base (#992 from set

6-14295), or LEGACY BASE-1L (6-37156) is required to operate the LEGACY

PowerMaster. The LEGACY PowerMaster is controlled by the signal generated by

a Lionel command base. It is not controlled directly by the signals from a CAB

controller.

Table of contents

Safety information: Protecting your layout from overloads 3

LEGACY PowerMaster Features 4

Connecting your LEGACY PowerMaster to the track 5

Connecting your LEGACY PowerMaster to O gauge track 5-6

Connecting your LEGACY PowerMaster to a FasTrack terminal section 7

Supplying power to your LEGACY PowerMaster 8

Connecting your PowerMaster with a PowerHouse power supply 8

Connecting your PowerHouse to a traditional transformer 9

LEGACY Control System set-up 10

Assigning a unique ENG or TR ID# to the LEGACY PowerMaster output 10

Setting the device type and control mode for the PowerMaster with a CAB-2 Remote Control 11

TrainMaster Command Control operations 12

Operating TMCC-equipped locomotives with the PowerMaster 13

Operating Conventional locomotives in the Command Control environment

using a CAB Remote Controller 14

LEGACY CAB-2 Remote Controller Commands 15

CAB-1 and CAB-IL Remote Controller commands 16

Running non-Lionel locomotives with your CAB-2/CAB-1 Remote Controller 17

Powering up for operation with MTH

Proto-Sound

1.0 operations 18

Programmming your QSI

M.T.H.

locomotive 19

Operating M.T.H.

Proto-Sound features with the LEGACY PowerMaster unit 19

Operating QSI

M.T.H.

Proto-Sound features with the LEGACY PowerMaster unit 20

Troubleshooting 21

FCC Statement 22

Notes 23

Lionel Limited Warranty Policy & Service 24

Note!

1 2 3 4 5 6 7 ... 23 24

Commenti su questo manuale

Nessun commento

BPC PowerMaster Manuale del Proprietario Pagina 2

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo BPC PowerMaster